*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* Model: VIR9973A Condition: New Description: Ductable Waste Oil Heater with 80 Gallon Tank and Exhausting Kit - Commercial / Industrial Features: 300,000 BTU - 120 Volt - 1,696 CFM Blower - 2.08 GPH Fuel Usage - Heating Area up to 10,000 Square Feet - Includes 80 Gallon Fuel Tank and Through Roof Exhausting Kit SEE OUR FULL LINE OF WASTE OIL HEATERS BY FOLLOWING THIS LINK: OUR WASTE OIL HEATER & ACCESSORIES LINE This Series of Heaters is Available in the Following Configurations: 150,000 BTU (heats up to 5,000 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits 200,000 BTU (heats up to 7,000 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits 200,000 BTU Ductable (Model VIR9971) 250,000 BTU (heats up to 8,500 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits 300,000 BTU (heats up to 10,000 Sq. Ft.) - Also see our full kits which include oil storage tanks and Exhausting kits 300,000 BTU Ductable (Model VIR9973) Description & Specifications: - Commercial/Industrial Ductable Waste Oil Heater - 300,000 BTU - Includes 80 Gallon Fuel Tank and Through the Roof Exhausting Kit - Heats up to 10,000 Square Feet (see heating area notes below)
- Superior quality and technology make our waste oil heaters the most reliable, cost efficient waste oil heaters in the industry. Our line of commercial/industrial waste oil heaters feature easy installation and modular low maintenance designs which simplify trouble shooting and repair. We carry a full line of spares for all of our waste oil heaters throughout the year and offer over-the-phone technical assistance if needed
- Why heat with waste oil? from large fleet operators to small businesses, everyone benefits from clean, cost-efficient heat. FREE heat! As energy prices climb, waste oil heat is gaining popularity. Not only does waste oil heat reduce your heating bills, it also eliminates the cost to haul used oil off-site. Waste oil heaters usually pay for themselves in 12 to 18 months
- Heat Range (BTUH): 300,000
- Fuel Usuage under Continuous Operation: 2.08 GPH
- Fuel Tank Included: 80 Gallon Capacity (tank dimensions: 35" H x 22" W x 35" D - see tank photo in this listing)
- Exhausting Kit Included: Through the roof exhausting/chimney kit, includes all components required to exhaust your heater through the roof of your building- (see exhaust kit photo in this listing)
- Heating Area: up to 10,000 SF (the heating area is based on buildings with minimal heat loss due to open doors, construction, materials, windows, insulation and other weatherization factors)
- Blower: 1,696 CFM
- Power Supply: 120V AC - 60 Hz (50 Hz versions available - please inquire toll free at 888-718-0706)
- Flue: 8" Class A (use only Class A rated exhaust piping with this heater)
- Flue Location: Top/Left Side
- Compressed Air Requirement: 2 CFM - 15 PSI (an air compressor IS NOT provided - you will need to provide an air compressor to operate this heater)
- Combustion Chamber Construction: 12 Gauge CRS (cold rolled steel)
- Cabinet: fine grain galvinized - rust resistant
- Louvers: Adjustable and locking
- Ductwork Attachment: remove four louvers from side of unit (see photo in this listing) and attach ductwork in place of louvers
- Includes: heater, secondary air regulator, oil bypass regulator, pump assembly, primary waste oil strainer, check valve, barometric damper, oil supply strainer and remote mountable thermostat
- Exhausting Options: Top, back, right or left (top is standard as shown in the photo in this listing. You can choose an optional exhausting placement at the time of order by calling our Customer Service department toll free at 888-718-0706)
- Approvals and Listings: EPA Approved under 40 CFR 279.23 - UL Approved under MH14518
- Optional Items: Exhausting Kits (through-the-roof or through-the-wall), available in 6" or 8" kits - Fuel Storage Tanks (80 or 215 gallons) - Fuel Metering Kit (regulates and monitors fuel entering heater, allows you to place the fuel tank up to 40 feet away from the heater - Removes the need for manual fuel adjustment - Please inquire: Toll Free at (888) 718-0706
- Please allow 2 weeks for delivery as this unit ships via truck freight
- Overall Dimensions - Heater: 36" H x 46" W x 54" L
- Ship Weight: 951 Lbs
- 90 Day Warranty on Wearable Components
- 1 Year Warranty on Non-Wearable Components
- 10 Year Warranty on Combustion Chamber (Includes Parts & Labor)
- Made in the U.S.A.
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* |
Sign In
lg~~60_1_21735_1.JPG)
